Jump to content

Paid Member Downloads for Contributors

These files are only available to members (contributors) that have paid the membership fee.

15 files

  1. OpenDTG V2 Code for P600

    By Andy - Admin

    This code is a full version intended for use with our V2 AIO and shield boards.  Can also be used with a standard Arduino Uno.
    Settings are for the Epson P600
     
    Requirements:
    encoder and bounce2 library in Arduino IDE 5v to 3v step down on the PE and ASF signals to protect the Epson 30 tooth pulley

    1,449 downloads

       (0 reviews)

    3 comments

    Updated

  2. OpenDTG V2 Code for 1430

    By Andy - Admin

    This code is a full version intended for use with our V2 AIO and shield boards.  Can also be used with a standard Arduino Uno.
    Code has settings for the Epson 1430 model
    Requirements:
    encoder and bounce2 library in Arduino IDE 5v to 3v step down on the PE and ASF signals to protect the Epson 30 tooth pulley needed

    1,375 downloads

       (0 reviews)

    10 comments

    Submitted

  3. OpenDTG Arduino Uno Shield

    By Andy - Admin

    These files are the Eagle design files and the ZIP is the Gerber production files for the OpenDTG Arduino UNO shield.
     
    R1 and R2 are 100 ohm Resistors
    D1 and D2 are 3.3v Zener Diodes.
    CN6 and CA58 are 11 pin FFC through hole connectors
    Screw terminals are 3.5mm
     
    Files are for personal use only. Can not be used for commercial or resell purposes.
     
    Any changes have to be shared back on OpenDTG.com
     

    717 downloads

       (0 reviews)

    0 comments

    Updated

  4. Color Swatches

    By Andy - Admin

    Print these color swatches so you can match your colors in your artwork to what you'd like it to look like after being printed.

    193 downloads

       (0 reviews)

    0 comments

    Submitted

  5. AIO MKR Barebones Code

    By Andy - Admin

    Please email or post any issues in the forum.
    This code ONLY runs on the AIO MKR Barebones board. Setup for use of optical limit switch.

     
    OpenDTG_AIO_V2_BUILD_00026_MKR-BETA.zip

    314 downloads

       (0 reviews)

    4 comments

    Updated

  6. Hi- Res Artwork files for test printing.

    By Andy - Admin

    The quality of the artwork can make a huge difference in your print quality.
    Here are a few pieces of art you can test print.

    741 downloads

       (0 reviews)

    0 comments

    Submitted

  7. Epson P600 Printer Driver

    By Andy - Admin

    Standard Epson P600 printer driver.  
    You want this driver only package not the one that has printer utilities.
     

    604 downloads

       (0 reviews)

    0 comments

    Submitted

  8. EK RIP - Add on files

    By Andy - Admin

    The cutsize.ini adds a full size platen to the options.

    258 downloads

       (0 reviews)

    0 comments

    Submitted

  9. 3D Printed Parts

    By Andy - Admin

    Tribal Armor has been kind enough to share his files for the platen lift system here: http://opendtg.com/viewtopic.php?f=20&t=824&sid=b09328e937359caedda61521d9ccd1d0
     
    30 tooth pulley for stepper motors. 
    Solid so you can drive whatever sized bore you need.
    Designed and contributed by: reptilesink

    1,503 downloads

       (0 reviews)

    0 comments

    Submitted

  10. Head Height Laser Code

    By Andy - Admin

    This snippet of code is a good starting point for implementing a break beam height adjust or stop

    374 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Gutenprint plugin as a RIP

    By Andy - Admin

    Here are the files that UHIM donated from the AIO challenge. I haven't had the time to mess with it so I'm uploading and hoping members here can test and collaborate on it.
     
    This will allow using photoshop and the gutenprint plugin as RIP software for printing light and dark garments on a Windows PC
    Please discuss this topic: https://www.opendtg.com/viewtopic.php?f=10&t=1060
     
    Might be a little harder to learn than EK but it is the only option for Free RIP Software
     
    I HAVE NOT TESTED THESE. USE AT YOUR OWN RISK!!!





    138 downloads

       (0 reviews)

    0 comments

    Submitted

  12. OpenDTG Basic Base Kit - Plate DXF Files

    By Andy - Admin

    This .dxf CAD file has all of the plates used in building the OpenDTG basic base kit and platen.
    Requires metal bending to use as is.
    The center rail for this design is the 1000mm C-Beam from OpenBuildspartstore.com
    We use aluminum but plastic or wood may work.

    887 downloads

       (0 reviews)

    0 comments

    Submitted

  13. EK Print Studio P600 - LICENSE REQUIRED

    By Andy - Admin

    This download is for EK Print Studio RIP Software.
    It requires a paid license to activate. That can be purchased from: support@eukondigital.com

    162 downloads

       (0 reviews)

    0 comments

    Submitted

  14. Pretreater Control Code for Arduino

    By Andy - Admin

    This code is for creating an automatic pretreat machine like the OpenDTG Mongoose.
    Moves a motor and turns a solenoid on / off based on speed and length 10k potentiometers. 

    336 downloads

       (0 reviews)

    0 comments

    Submitted

  15. Base Controller Code - Z Axis

    By Andy - Admin

    This code is for controlling motors to raise and lower the printer. It is setup for 2 TB6600 motors, up and down buttons.

    507 downloads

       (0 reviews)

    1 comment

    Updated

×
×
  • Create New...