Rohitb

If still available 

share details 

rohitbajare5853@gmail.Com

ok

On 12/23/2022 at 11:31 AM, Mr.Carter said:

So if anyone want to convert XP-15000 to industrial roll to roll machine same as xp600 chinese printer i have conversion kit available(currently only for USA)

what you will get

1.Controll board to emulate all the sensor

2.pump assembly for ACSAP autoclean system after each print to get very accurate prints everytime

3.touch screen controll display

4.smps 12v to power the board

 

Features of Controll board

1.auto ink reset(chipless firmware is required) printer will not show your carts runout after few print which is the bug of chipless firmware 

2.supports roll and sheets as well just need to change mode from display 

3.can do headclean when the roll is loaded inside the printer it will not eject it out

4.12v port for auto roll unwinding and sensor

5.cut media feature for roll printing 

6.load media feature to load the sheet inside

7.foward backward buttons on display to move media forward or backwards 

8.setting can be adjusted from display like cut distance , move speed etc. To align it with your setup

9.timer 12v port for white ink stirrer motor

How to install 

Installation is very easy remove the side lead of printer so you can access motherboard connectors just remove the original cables and plug cables coming out from control board

 

Price 300$

250ml Bulk in system with wims addon +150$

On 11/3/2022 at 11:44 PM, amarbinjilani said:

Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING

And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING

And thats make it difficult to convert it into flatbed but now it is possible...

pf-encoder will be seperate and arduino will provide all the sensor signal to epson,

Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes 

If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed 

Sir, I need this please can you mail me on ammar.mohd77@gmail.com in this email

Can you send me this file? 

My Email:rohitbajare5853@gmail.com

this Work For L8180 OR ET 8550?

its sp roll Software Sell Globally Diffrent Name Zig.... Smart.... cos... 

if u Want in Bulk Contact me