JasonConnectGO
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by JasonConnectGO
-
-
On 1/13/2023 at 9:27 PM, johnson4 said:
well.
I have learned there is no best method oOn 1/14/2023 at 1:43 PM, johnson4 said:I had a lot of p800’s. They are good, but has very little room for error- the head is closer to the film so head strikes are often with it. One good headstrike, it’s done.
If you can keep that from happening it’s a good printer, has a good ink system. Replace the dampers every 3-4 months. The ink settles in it, but shake the carts daily and do a heavy head clean and it’s good to go.
there is nothing about the stock ink system to break in the P800 due to the white Ink except the dampers.
all it ever needs part wise is dampers. I’ve only had to replace the capping station once on one of them.
P400 was good too, especially if you ran good ink through it. I started with those.
They are just as fragile as the others though.
I have a fleet of dead printers, haha.
Do you have a YT channel or something? I notice you have a lot of knowledge, so just was wondering that.
HELP WITH CHOICE / et-8550 VS L1800
in General Direct to Film Discussion
Posted
johnson4 with the xp15000, what dtf ink do you recommend, since you had decent success with it?