tangkibot
-
Posts
60 -
Joined
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by tangkibot
-
-
-
hi bro, you can change the L18050 printer with XP600 basic head to DTF or UV roll to roll. Add a stepper motor to drive the shaft and move the encoder to the right side to control the pump, use bracket encoder.
If you have experience using Arduino, you bypass the PE, PW, and ASF sensors, so that the printer can print on transparent media such as PET film and PET DTV, and the printer can adjust the length of the print area.
And you can also control the pump for manual cleaning or clean the pump manually using a button.
If you are interested, you can contact me on Whatsapp wa.me/6285695407954
-
Hi, I made a UV DTF Roll to Roll printer using an Epson L18050.
Ready Complete Wiring Diagram and Arduino code.
Whatsapp wa.me/6285695407954
-
On 10/7/2023 at 5:46 AM, Heaven867693 said:
When you put 10 prints in the same location, is it a stack of copies in the same location?
Yes, its very accurate
-
Epson L18050 Flatbed Mode for UV Printing
Arduino Code & Wiring Diagram
Whatsapp wa.me/6285695407954
-
On 7/28/2023 at 2:28 PM, gpsuser said:
I want to buy pleas e email me for code and diagram.
gpsuser@naver.com
Whatsapp wa.me/6285695407954
-
I Have bypass all sensor for Epson L18050.
In L18050 When you reverse the feed roll paper back, its will suck and waste the ink
So I can remove all sensors, PE, PW, ASF, and can separate pump too.
So I can print everything Sheet or Roll to Roll without all sensor and can cleaning pump manual.
You will always get error without bypass sensor.
If you interesting
Whatsapp wa.me/6285695407954
-
Hi brothers, I have successfully bypass PE, ASF and PW sensors for epson L18050.
Epson L18050 with XP600 head, more faster than the Epson L1800.
With bypass sensors, you can have more scope and freedom to build assemblies for DTF or UV printers.
For diagram, wiring and arduino code, you can contact me.
Whatsapp wa.me/6285695407954
-
On 7/1/2023 at 2:01 AM, vivekhada@gmail.com said:
i want to buy pleas e email me for code and daigram vivekhada@gmail.co.
Whatsapp wa.me/6285695407954
-
Does the APG sensor have to be connected too?
-
Hi everyone, you can buy from me, my code is only use one arduino with pump function as like as L805 standart printer.
Whatsapp wa.me/6285695407954
-
ok, share how to made it.
-
Sorry, i sell code and diagram.
-
The UV A4 L805 printer is enough with one arduino, the pump is driven by a stepper motor, functions like a standard printer .
Without changing the position of the encoder wheel, without adding a servo, without needing an additional pump. Enough with one arduino, two drivers, and two stepper motors.
Complete with diagram and arduino code.
If you are interested, can PM me more.
Thanks 😊
- 1
-
Yes, you can with EKPRINT Software, its support for Epson L1300
-
On 7/14/2022 at 11:34 PM, Mr.Carter said:
Yess
You can connect separate pump for cleaning, system automatically turn on the pump when you give the cleaning
no you cant, L805 pump just operated by middle shaft with gear.
-
If you cut rod, printer cant cleaning.
How about cleaning???
-
can you share?
-
Conversion L18050 to DTF UV Roll to Roll
in Epson Desktop DTF Printers
Posted