Joker
-
Posts
38 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by Joker
-
-
Hey guys I'm having trouble to print with my l1800 im having banding problems with the resolution 1440x720 but I see every one printing like that is it me that I'm doing something wrong or all the other people is printing like that
-
9 minutes ago, johnson4 said:
Course powder will cause hard/plastic-y prints, Especially if you get too much on there.
The more ink, the more powder.
The wetter the ink, the more powder
Course powder, is the thickest powder.
Let your prints air dry for 5-10 minutes, and make sure you are using the least amount of ink possible with good results before running it through the powder.
Too much ink, not drying enough before powdering, and using course powder, are 3 individual things that will cause this. stacking all 3, well, you know. Course powder on it's own is not bad, but has it's place, and is easily susceptible to adding to the above issues easily.
I recommend medium powder.
Cool thanks J I'll try
- 1
-
Hey guys my designs are coming out a bit hard, does anyone nows what am I doing wrong I'm using coarse powder, is because was to long on heat or is the heat press with out pressure I already tryed almost everything I know but with no results.
If any body has any suggestions I'll be very grateful
-
Hi guys is there any rip software for epson ET-14000?
-
5 minutes ago, Sandor said:
You are satisfied with the print quality and maintenance with Epson xp 15010 DTF printing.
I've got a Epson xp-15000 and ye is good quality
-
Hey guys,
Recently I'm having trouble with EKPrint,
I'm trying to print a design that contains in some parts really fine white lines and because of the choke the printer is not printing them and when I reduce or disable the choke the white under base just come out of the design.
Does anybody know how solve this problem?
-
Just now, MikeMason said:
Awesome thanks
You welcome.
-
6 minutes ago, MikeMason said:
Hello, what rip software are you using with you XP15000?
Hi, EKPrint studio.
-
27 minutes ago, MikeMason said:
Ok cool. I'm actually about to start converting it now. I wanted make sure it was able to be done with th XP15000 first. By the way thanks. You're saving me a couple $$$ and a roadtrip today to go buy a wf1100 that needs maintenance.
Sure. Always you need help just ask.
-
5 minutes ago, Joker said:
You have a chip at the waste tanke, you have to buy a chip reseter and you just press it against the chip until comes green and that's it
But if you already made your printer Chipless you don't need one just change it once is full
-
1 minute ago, MikeMason said:
Where'd you get your reset chip?
You have a chip at the waste tanke, you have to buy a chip reseter and you just press it against the chip until comes green and that's it
-
15 minutes ago, MikeMason said:
I haven't started taking my rollers out but where do I connect the hose for the waste bottle and what brand tanks did you use? In sure I'll have more questions but I just needed those before I started. Thanks again
About the rollers it depends if you just take them direct through the top or you just take the printer appart, you got to be becarefull about the the plataform where the the rollers stand, because if you use to much pressure than your designs come with stripes because of the plataform, I advise you to leave the ones on the side because when you print big designs you won't be abble to print the full paper because you'll have to leave some space because you won't have any rollers at the front, about the waste tank I just bout a reset chip and I'm using the same over and over just fill them with some cotton or paper to dump the ink
-
9 minutes ago, MikeMason said:
Hello,
Is it OK if I messaged you about converting the XP15000? I'm trying to convert mine.
Sure it is what you need to know?
Happy to help if I can.
-
-
14 hours ago, johnson4 said:
I don't remember exactly, but at 50 percent ink level, it shouldn't be doing that.
Hey J, thanks I think I have sorted out that, thanks for the help, now must try to make the colors more vibrant.
-
5 minutes ago, johnson4 said:
I don't remember exactly, but at 50 percent ink level, it shouldn't be doing that.
So should I lower the ink level?
-
45 minutes ago, johnson4 said:
Hi, while you can get good reproduction, it’s not possible to get perfect reproduction.
I use graphics settings, not vivid and I have good results.
I'm also using graphic settings but for some reason is using so much ink that the design comes to a pudle of ink and I just don't know what should I do
-
17 hours ago, johnson4 said:
So the program installed correctly, your just not able to select the printer? It’s in a drop down menu at the top. If it’s not, it’s not installed in your computer.
Hi J,
Do you know a color set up to have vivid a pitch perfect colors?
-
2 hours ago, johnson4 said:
So the program installed correctly, your just not able to select the printer? It’s in a drop down menu at the top. If it’s not, it’s not installed in your computer.
Hi J, thanks for the response I have sorted this issue but now the printer is just printing with the paper feed underneath and not with the rear feed. I'll find one solution.
Bests.
-
On 2/12/2021 at 5:40 PM, johnson4 said:
No Worries, It's not a dumb question. Even if it was, we all ask em'.
I remember the first time I went to buy it, I thought it was sketchy. Like, Oh, well this isn't right.
Nope, it is, and it's legit.
Good luck!
Hi J, I just bought EK print studio but Im having troubles installing it
For some reason the program is not detecting my printer, maybe you know what's wrong, or did already happened to you?
-
4 minutes ago, johnson4 said:
No Worries, It's not a dumb question. Even if it was, we all ask em'.
I remember the first time I went to buy it, I thought it was sketchy. Like, Oh, well this isn't right.
Nope, it is, and it's legit.
Good luck!
Thanks again
- 1
-
1 minute ago, johnson4 said:
Sometimes they reply right away, sometimes it takes some time. Overall, If I were you I would try a demo first, since the software isn't cheap. However, From what I can see, it's about the only option for the 15000 series.
If you end up purchasing it, it's Paid via PayPal's payment processing Via an invoice.
I already send them an email thanks let's see what they said
-
1 minute ago, johnson4 said:
"For more Information about the product, please send your inquiry to info@eukondigital.com.
To order a demo version of EKPrint Studio, please specify which model your DTG printer is based on (R1900, TDozer, etc.).
· Supports C88/WF7010/1100/T60/P50/R230/R800/L805/L1800/R1290/R1390/R1400/XP15000/R1800/R1900/P400/P600/P800 based DTG printers
· Supports R2000/R2100/R2200/R2400/R2880/R3000/R3800/R3880/R4800/R4880/R4900/R4910/R7600/R7800/R7880/R9600/R9800/R9880 based DTG printers
To contact us:
E-mail: info@eukondigital.com
"
Há OK so I just drop them a email and I can buy the email?
Cool thanks for the help and sorry for the dumb questions.
And thanks a lot for your help like always it did help loads
-
13 minutes ago, johnson4 said:
I purchased mine directly from Eukon Digital years ago. it doesn’t look like Andy carries the 15000 version. You can google their website and email them for a demo.
same for the Chipless, www.Chiplesssolutions.com
I was at their website and there is no option to buy the product is there anything I'm doing wrong?
How to convert an Epson printer to (DTF) Direct to Film Printer
in General Direct to Film Discussion
Posted