-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by dropship88
-
-
On 2021. 4. 6. at 오전 2시 9분, JTS said:
모두들 안녕!
포럼에 처음 왔으며 몇 가지 질문이있었습니다 ...
저는 Epson XP-15000을 구입하고 시작 및 실행에 필요한 기본 사항을 모았습니다. 인터넷 여행 중 어느 곳에서 XP-15000이 프린터를 통해 특정 전송 필름을 이동하는 데 문제가 있다는 것을 읽었습니다. 누구든지 이것을 확인할 수 있습니까? 이것이 사실이라면 XP-15000과 함께 사용할 권장 전사 필름이 있습니까?
CISS 키트도 찾고 있습니다. 약 $ 150에 하나를 찾았습니다. 약간 높은 것 같지만 솔직히 말해서 XP-15000에 대해 많은 것을 찾을 수 없었고이 키트의 진행률이 무엇인지 정말 모릅니다. 또한 미국에서 배송되는데, 제가 찾은 다른 키트가 해외에 있었기 때문에 플러스입니다. Amazon의 범용 키트가 작동하는지 궁금했습니다. CISS 키트에 대한 권장 사항이 있습니까?
그리고 마지막으로. 앞서 언급했듯이 YouTube와 다른 포럼에서해야 할 일을 정리했습니다. Epson XP-15000 용 DTF 변환 가이드가 "완전하다"고 말했습니까?
Yes, the xp15000 has serious problems with rear paper feeding.
1. Fake paper jam problem - There is a problem with PaperSense. There is still no clear solution for this part. Part replacement is the best solution2. The paper cannot be fed normally because the back of the dtf paper is too slippery. (There is no need to clean or disassemble the larger of the two rubber rollers in the rear feed paper input)
3. Paper pressing phenomenon due to the elasticity of paper.
When the paper passes through the black plastic part (a.star wheel holder assy) and the rubber roller under the connected metal (b,star wheel holder assy), the paper with weak elasticity after printing from the head In the case of , a very serious line is created as the paper moves up and down and the ink comes into contact with the bottom of the a.star wheel holder assy.It is also important to check the level of the internal parts, not the horizontal-outside level of the printer. Emission related parts.
Paper is best tested by retailing a wide variety of brands. The above information is based on my first-hand experience.
-
-
38 minutes ago, johnson4 said:
I did white drop medium
level 1
50 density
1440x1440 resolution
i do mixed, because I don’t want a solid white layer.
underbase choke varies by design, I do between 2-10.
one pass enables both layers to print, enhanced is bi-directional and should be checked, it prints twice as fast.
It is being set for a black t-shirt.
I tested it up to 150% density (B)
I worry because there is no satisfactory result.Which of B (density) and C (Opacity Contrast) will be prioritized over white ink density
I tested it
Density 125 Opacity Contrast -15 VS density 150 Opacity Contrast 0 is related and there seems to be little difference. (I personally judge that there is no comparative difference)
Complaints ><><><>Is the weather influence??
White cartridges Partially start curing of the print head after a day or so.....-.- -.-
The (probably) biggest downside of EK is...
Too little information on skills and usage...
YouTube and postings, etc. -
-
5 hours ago, johnson4 said:
EKprint (유콘 디지털)에서 직접 $ 350.
Thank you~
- 1
-
On 2021. 2. 16. at 오전 6시 3분, Joker said:
안녕하세요 J, 방금 EK 인쇄 스튜디오를 구입했지만 설치하는 데 문제가 있습니다.
어떤 이유로 프로그램이 내 프린터를 감지하지 못합니다. 무엇이 잘못되었는지 알고 있습니까? 아니면 이미 발생한 일입니까?
How much does it cost to purchase an ek studio rip for xp1500?
-
11 hours ago, MikeMason said:
그래 그거 짜증나. 나는 내 사업으로 꽤 좋은 이익을 얻지 만 나는 싸기 때문에 항상 옵션을 찾습니다.
AcroRIP V10.x officially supports XP-15000.
Other users are using printers that are not supported by AcroRIP V9.
It is said that AcroRIP selects a printer supported by AcroRIP similar to the ink adjustment and the corresponding printer's header, and uses several details individually. For testing, download AcroRIP V9 (free version or dark version) and try it out .... -
On 2021. 2. 18. at 오전 4시 57분, MikeMason said:
Which RIP are you planning to use?
Are cartridges for refilling? CISS?
I am also thinking about choosing the Epson XP15000 (Epson XP15010). -
EKPrint Studio is possible.
AcroRip 9xx version is probably also possible.(((The next expert appeared~
Epson XP-15000 Setup
in XP-15000 DTF Printers
Posted
It's a very scary case, and I'm using 1 print for a part because it's completely stupid.
In the case of a fake paper jam, an attempt was made to repair it by citing postings from YouTube materials and other forums, but it failed, eventually moving to the official service center, also at the official service center ---new motherboard and pe sensor were exchanged, but it worked again Serious damage to the head during one repair attempt.... Not sure if it's because of [Chipless firmware], 3 of the same [Chipless firmware: indicated by ink level pool] 2 are from another brand [Chipless firmware: ink] Volume moving display] 1 out of 3 fake paper jams.
Error message while printing without any prior warning....unlucky case -.-
Use an air cleaner spray with a long straw to clean with a roll. Do not try the roll because it is inconvenient to use.
Even if only the pizza wheel is removed, there are some that are of good quality, but if not, the pizza wheel + star wheel holder assy (plastic: the paper inlet side, not the outlet side) is removed and used. Suction fan is not planned. I tested it a few times with a model with this symptom, and the conclusion is that the internal leveling problem and the strength of the ball fastening, etc... When the pizza wheel is removed, a minute deformation is expected in the star wheel holder assy parts... The conclusion is that when the star wheel holder assy is removed no big problem.
100% empathy. thx~