darkdreamer
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by darkdreamer
-
-
13 hours ago, johnson4 said:
Just because the powder is cured doesn’t mean it’s cured correctly.
good luck!
well , thx anyway
-
46 minutes ago, johnson4 said:
Probably not enough cure, depending on what you are using, is it a counter top oven?
yup , the heat only top with the oven and distance between petfilm around 10cm . is cooked completly . mayb i have to reduce the black ink
-
43 minutes ago, johnson4 said:
it's going to be something to do with the time and temperature, its under cured/ cured too fast.
250° and 2m20sec . this the best time and temp after i tried hundred time . after cook not all happen , but mostly defected with large area black
-
27 minutes ago, johnson4 said:
That’s your problem.
of cause i know , i wanna find out what the problem , do u think u help with these ?
-
22 hours ago, johnson4 said:
What’s your curing method specifically
after using oven to melt the powder
-
while printing , suddenly the white is missing ...
in General Direct to Film Discussion
Posted
after having this issue , i search in all way is about bad damper , so i had replace with brand new damper yet it still happen ....
sometime after print 20+ no problem
sometime 1st time ( around 90% it happen ) or 2nd , run nozzle test the white nozzle missing , after head cleaning the white coming back but only last about 3-5 a3 print ....