elliotiscool

Sorry about that. This one should work screen-20220417-173154.mp4

Hey guys, Been using this machine for about 6 months every other day. It just stopped working this last week. Sounds like a motor revving up?! Attaching a video with audio. Any help would be appreciated! VID_20220417_122739.3gp

Vents were open. It kinda sounded like a popping noise from the waste line.

Hey guys, So I was setting up a 2nd P600. Printer is brand new and converted through DTF Superstore. On the initial ink charge, I noticed that the ink didn't seem to be going through the lines. I could hear a noise coming from the waste line for the first few minutes of the ink charge. Nothing expelling from it either. Afterwards the machine made a loud whirring sound for a second; a noise I've never heard before for the last 10 months that I've been printing with my first P600. Immediately gives a 0x03 error. Restarted the printer and it now gives error 0x51. Btw, ink cartridges are properly filled a purged. Any help would be appreciated!

Thanks for the input!

Hey guys. I'm planning on taking my P600 apart for the first time. Gonna change the wiper? (forget what its called. Cleans off the printhead as it moves across it) Also gonna change out the plastic screw that releases the printhead. Just wondering if anybody has any recommendations of videos I should review to make sure I do everything properly. Thanks.

Are you using the generic machine that is being promoted by every Chinese supplier or the much more expensive Audley?

This is the stuff that most people don't talk about when it comes to these systems. I was planning on getting one of these in the coming months. Thank you so much for sharing.

You are a saint. Everything is up and running. As always, thank you for your help!

Unfortunately, the firmware isn't working for me. I think its because of the "cannot recognize ink cartridge" error that keeps popping up.

I was just looking at the website. So I want to purchase an activation key, correct? Thanks!

Ughhhh, I was setting up another P600 and when I was installing the drivers I accidentally allowed it to update the printer firmware. Now I get an ink error, and the ink reset button only removes the error for a millisecond before the error comes up again. Is there any way to revert my firmware? If not, is there any sort of workaround or is my printer a permanent brick now?

Will give that a try. Thanks guys!

Hey guys, Due to the consistent maintenance we do on the P600, the plastic printhead release screw has slowly stripped over time. I'm attaching a picture. I have a feeling I'm not the first to run into this issue. Curious how you guys fix this and prevent it in the future. Thanks!

Thanks for the update. How are you keeping your film flat as it goes under the printhead? Is it downward tension from your diy roller?