Renee420 Posted March 8 Share Posted March 8 I am looking to know your method for resetting ink levels on XP-15000. chipless firmware does not keep ink levels full and sometimes I run our of white before the print job is done and it spits out the film (even if i reset before i start) Pulling the reset tank while printing does not do anything So wondering, how are you adapting? Installing a CISS is my next project however this won't fix this issue so I am hoping for some ideas Thank you Renee! Quote Link to comment Share on other sites More sharing options...
johnson4 Posted March 9 Share Posted March 9 (edited) On 3/8/2024 at 12:06 PM, Renee420 said: I am looking to know your method for resetting ink levels on XP-15000. chipless firmware does not keep ink levels full and sometimes I run our of white before the print job is done and it spits out the film (even if i reset before i start) Pulling the reset tank while printing does not do anything So wondering, how are you adapting? Installing a CISS is my next project however this won't fix this issue so I am hoping for some ideas Thank you Renee! For me when I used this machine pulling the waste tank and putting it back in did the trick as it reset the ink counter with Chipless. You could try “ pausing” the print on the printer then do the waste tank thing, any form of “pause” by opening a lid or doing something that doesn’t trigger an eject. that’s a downfall to that machine having only 7ml ink Cartridges. Maybe the firmware is different now. I know there were different Chipless providers, one worked well and one didn’t for me back then. Edited March 9 by johnson4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.