Jump to content

cooling UV light


Recommended Posts

  • 7 months later...
  • 3 months later...
On 7/6/2020 at 12:22 PM, reptilesink said:

IMG-20181112-WA0000.jpg4x 10w

Where did you get such a small 4 x 10 W LED?
Highest power I found of that size was 4x 5 W.

The small UV printers from China use 30W for curing, which is usually OK but can be too less in some cases.
Having an LED of just 10mm width would be cool ;)

Would you mind sharing?

Link to comment
Share on other sites

On 7/6/2020 at 11:29 AM, reptilesink said:

It will do it OK.

Depending in the leds and the heat sink used you don't always need water cooling and just a fan for air exchange is enough.

Yes, a fan can be sufficient for 30W curing LED (personal experience).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...