Mr.Carter Posted March 20, 2021 Share Posted March 20, 2021 (edited) Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING And thats make it difficult to convert it into flatbed but now it is possible... pf-encoder will be seperate and arduino will provide all the sensor signal to epson, Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed Edited March 20, 2021 by Mr.Carter 3 Quote Link to comment Share on other sites More sharing options...
cccsdacaf cdsac Posted June 8, 2021 Share Posted June 8, 2021 thanks very much.ejyb123@gmail.com Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted June 17, 2021 Author Share Posted June 17, 2021 On 6/8/2021 at 9:30 PM, cccsdacaf cdsac said: thanks very much.ejyb123@gmail.com Sent Quote Link to comment Share on other sites More sharing options...
Сентюрев Posted June 17, 2021 Share Posted June 17, 2021 На парковочной станции шланги надо менять? Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted June 26, 2021 Author Share Posted June 26, 2021 On 6/17/2021 at 11:27 PM, Сентюрев said: На парковочной станции шланги надо менять? No no need to change pipes of capping station 1 Quote Link to comment Share on other sites More sharing options...
Сентюрев Posted July 1, 2021 Share Posted July 1, 2021 Охлаждение вода или воздух? Если вода, то какой насос? Я хочу поставить мембранный насос. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted July 4, 2021 Author Share Posted July 4, 2021 On 7/2/2021 at 1:56 AM, Сентюрев said: Охлаждение вода или воздух? Если вода, то какой насос? Я хочу поставить мембранный насос. For uv led? Quote Link to comment Share on other sites More sharing options...
Albert Sun Posted August 15, 2021 Share Posted August 15, 2021 thanks for the sharing. Interested and here's my email: tntanyhow@gmail.com. Quote Link to comment Share on other sites More sharing options...
Сентюрев Posted August 16, 2021 Share Posted August 16, 2021 Для уф диода поставил мембранный насос. Все работает отлично. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted August 28, 2021 Author Share Posted August 28, 2021 On 8/16/2021 at 12:16 PM, Сентюрев said: Для уф диода поставил мембранный насос. Все работает отлично. 👍 Quote Link to comment Share on other sites More sharing options...
comradevn7 Posted December 3, 2021 Share Posted December 3, 2021 Thank in advance sir, w2h.vncorp@gmail.com Quote Link to comment Share on other sites More sharing options...
lyahpavel Posted December 5, 2021 Share Posted December 5, 2021 if possible, then to me. lyah.pavel@gmail.com Thanks! Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 6, 2021 Author Share Posted December 6, 2021 Sent to all Quote Link to comment Share on other sites More sharing options...
Gino Pino Posted December 6, 2021 Share Posted December 6, 2021 Thanks, i need it too! t7452380839@gmail.com Quote Link to comment Share on other sites More sharing options...
sebahattinadiguzel Posted March 1, 2022 Share Posted March 1, 2022 rica etsem bana da atar mısınız? Epson l805 uv yapacağım. sebahattinadiguzel@gmail.com Quote Link to comment Share on other sites More sharing options...
memo Posted March 16, 2022 Share Posted March 16, 2022 Thanks. alicimehmet1978@gmail.com Quote Link to comment Share on other sites More sharing options...
zainaja Posted March 23, 2022 Share Posted March 23, 2022 hi, i have epson L805, i want to try convertit, please send me your guide zainurihasan94@gmail.com thanks Quote Link to comment Share on other sites More sharing options...
Tysu Posted June 17, 2022 Share Posted June 17, 2022 Thank you very much. tysu88@gmail.com Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted June 17, 2022 Author Share Posted June 17, 2022 Sent to all Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted June 17, 2022 Author Share Posted June 17, 2022 From now free code will not be available , the code , guide video and wiring diagram will cost 65usd Quote Link to comment Share on other sites More sharing options...
Vince02 Posted August 18, 2022 Share Posted August 18, 2022 On 3/21/2021 at 4:56 AM, Mr.Carter said: Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING And thats make it difficult to convert it into flatbed but now it is possible... pf-encoder will be seperate and arduino will provide all the sensor signal to epson, Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed Interested. Here's my email. marksenilbag02@gmail.com Quote Link to comment Share on other sites More sharing options...
zimin zhu Posted October 20, 2022 Share Posted October 20, 2022 ziminz@163.com Thanks Quote Link to comment Share on other sites More sharing options...
slikkflikk Posted October 23, 2022 Share Posted October 23, 2022 (edited) Hi,please send to me sir slicflic@gmail.com Edited October 23, 2022 by slikkflikk Quote Link to comment Share on other sites More sharing options...
kwame Posted November 30, 2022 Share Posted November 30, 2022 On 3/20/2021 at 8:56 PM, Mr.Carter said: Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING And thats make it difficult to convert it into flatbed but now it is possible... pf-encoder will be seperate and arduino will provide all the sensor signal to epson, Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed Please send it to me. Thanks in advance. kwameakwetey@gmail.com Quote Link to comment Share on other sites More sharing options...
Hhggg Posted December 23, 2022 Share Posted December 23, 2022 Hello can i ask send me guidance to do this also, its first time i gonna try this can i achive goal as first try? Behtashf10@gmail.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.