Dtfnoob Posted August 10, 2022 Share Posted August 10, 2022 Hi all, ive been trying to figure this out recently. Im not sure what causing the issue. I had several successful print several days. However now whenever i print. After coming out of the printer all color looks solid without scratch. But after trying to cure the ink without powder. It starts to scratch out the colors. Anyone encountered this issue? Quote Link to comment Share on other sites More sharing options...
anum11 Posted August 10, 2022 Share Posted August 10, 2022 Maybe over heating causes this. It could be a worse quality film or ink maybe. Quote Link to comment Share on other sites More sharing options...
Dtfnoob Posted August 10, 2022 Author Share Posted August 10, 2022 8 minutes ago, anum11 said: Maybe over heating causes this. It could be a worse quality film or ink maybe. I was actually able to print fine with the same settings 2 days ago. Could it really be the ink? Quote Link to comment Share on other sites More sharing options...
Dtfnoob Posted August 11, 2022 Author Share Posted August 11, 2022 any other suggestion that can help me out? Quote Link to comment Share on other sites More sharing options...
johnson4 Posted August 11, 2022 Share Posted August 11, 2022 (edited) 3 hours ago, Dtfnoob said: any other suggestion that can help me out? Pretty much all it can be is your film or overheating if nothing is touching the film. Rolls/sheets of film can go from good to crap, it happens all the time. First step I would do is make sure the white side doesn't have that look. If it does, Something is hitting it. If it doesn't, It's the film or image in my opinion. Overheating does cause some random looking issues, so it's possible but least likely. Edited August 11, 2022 by johnson4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.