epson l805 DTF

[jony]

I have a problem that cannot be solved, a certain printing problem while printing the white
The head touches the page and downloads the print in the test I did when printing not in the RIP program
 but in Windows, the print is normal

 

[johnson4]

6 minutes ago, jony said:

I have a problem that cannot be solved, a certain printing problem while printing the white
The head touches the page and downloads the print in the test I did when printing not in the RIP program
 but in Windows, the print is normal

 

 

Depending on the Printer and the RIP you use, It's a setting to designate the printhead height when printing. At it's lowest setting it shouldn't touch the film, so probably need to check on that. For time being you should be able to adjust head height in the RIP or on the printer. 

[jony]

thank you johnson 

how i can adjust head in my rip dtf software ?

[johnson4]

1 hour ago, jony said:

thank you johnson 

how i can adjust head in my rip dtf software ?

Depends on the RIP and the printer you are using, if it's possible. 

[jony]

Epson l805 

Rip 

Acro RIP 9.03

[johnson4]

3 hours ago, jony said:

Epson l805 

Rip 

Acro RIP 9.03

I’m not familiar with that setup, I don’t believe acro supports this and I don’t think the l805 has it. 
 

 

[anum11]

You should get a platen at exit of paper. If paper falls down while exiting. printer, printhead will touch to paper.