Donna Posted August 16, 2023 Share Posted August 16, 2023 Having problems with my mini shaker oven not auto feeding. It starts out in the beginning auto feeding maybe a couple of inches and then it will keep feeding the film and not stopping when it it past the laser beam. I have to turn the roller off and back on to feed through the oven. Quote Link to comment Share on other sites More sharing options...
johnson4 Posted August 16, 2023 Share Posted August 16, 2023 (edited) 1 hour ago, Donna said: Having problems with my mini shaker oven not auto feeding. It starts out in the beginning auto feeding maybe a couple of inches and then it will keep feeding the film and not stopping when it it past the laser beam. I have to turn the roller off and back on to feed through the oven. Clean the optical sensor face. If that doesn't help, look and see if you can see the light on the relay. If the light on the sensor is off until something is infront of it but it keeps feeding the film, then your relay is going bad. It the light at the sensor stays on when nothing is In front of it: adjust the optical sensor, replace the optical sensor. Edited August 16, 2023 by johnson4 Quote Link to comment Share on other sites More sharing options...
amybennett Posted September 19, 2023 Share Posted September 19, 2023 Hey, I'm having this exact same issue.. I've only had machine for maybe a month. my sensor light stays green, never turns off. Donna, did you find any solutions that worked for you? Quote Link to comment Share on other sites More sharing options...
anum11 Posted September 21, 2023 Share Posted September 21, 2023 Powder falls onto sensor, try to make a cover for the sensor. So powder would not build on it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.