modelismoartesanal@portuga Posted April 12, 2020 Share Posted April 12, 2020 Hi there guys. Just made my introduction in the forum and would like to have few insights. I've been reading a lot of threads here in the last few days but there are still a few doubts left. For the printers I have the following available: A4 - EPSON L805 A3 - EPSON 1400 A3 - EPSON R1800 I would prefer the A4 size as that would make the build itself a lot cheaper. Also A4 size is more than enough for my needs, I will print directly on railroad models (same as a phone case). From what I could gather around the forum the L805 seems to miss the encoder wheel which makes the adaptation harder. I ordered the Arduino UNO and the shield from OpenDTG and it would be perfect if I could adapt this kit to the L805, any help? Second question regards the UV leds and curing, I need precision but usually a print of one of my models just takes 3-5 minutes and I only print around 100 a month so I think water cooling would be a little overkill. What do you guys think? Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
reptilesink Posted April 12, 2020 Share Posted April 12, 2020 For the LED's as long as you have a decent heat sink fitted to them then you can use a pc cooling fan. Quote Link to comment Share on other sites More sharing options...
modelismoartesanal@portuga Posted April 13, 2020 Author Share Posted April 13, 2020 Thanks for the input reptilesink, I already ordered some of that leds to do some testing. Any input on the other questions guys? Quote Link to comment Share on other sites More sharing options...
modelismoartesanal@portuga Posted April 13, 2020 Author Share Posted April 13, 2020 14 minutes ago, roni farias said: esse modulo foi criado por mim. hahaha... Obrigado a ambos. Thanks to both of you. Quote Link to comment Share on other sites More sharing options...
PITA Posted October 31, 2020 Share Posted October 31, 2020 On 4/12/2020 at 8:05 PM, reptilesink said: For the LED's as long as you have a decent heat sink fitted to them then you can use a pc cooling fan. yes, fan-cooling can be sufficient for 30 W curing LEDs Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted March 21, 2021 Share Posted March 21, 2021 Quote Link to comment Share on other sites More sharing options...
josualo Posted July 27, 2021 Share Posted July 27, 2021 Hello, I wanted to modify an epson r2400 but what I do not understand if the uv led is put in the car when starting the machine, would it not hit with the left side when moving the first time it starts? Quote Link to comment Share on other sites More sharing options...
mehmet Posted March 16, 2023 Share Posted March 16, 2023 yok bişey olmazi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.