Heaven867693 Posted June 29, 2021 Share Posted June 29, 2021 very admirable https://youtu.be/wUehIT02t4o Quote Link to comment Share on other sites More sharing options...
arapid@aol.com Posted July 22, 2021 Share Posted July 22, 2021 It call UV DTF AB films https://www.focusij.com/focus-direct-transfer-uv-dtf-film-p00118p1.html 1 Quote Link to comment Share on other sites More sharing options...
Heaven867693 Posted July 23, 2021 Author Share Posted July 23, 2021 Thank you sir! Quote Link to comment Share on other sites More sharing options...
josualo Posted December 6, 2021 Share Posted December 6, 2021 Hello, I am using it with an Epson without a flatbed, it can be done in several ways, one print on the film that already has glue, another is to print on an acetate and put glue in a channel, then with another pass send the color along with the target. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 9, 2021 Share Posted December 9, 2021 From where i will get the glue? To put it into the channel. On 12/6/2021 at 6:56 PM, josualo said: Hello, I am using it with an Epson without a flatbed, it can be done in several ways, one print on the film that already has glue, another is to print on an acetate and put glue in a channel, then with another pass send the color along with the target. Quote Link to comment Share on other sites More sharing options...
Heaven867693 Posted December 14, 2021 Author Share Posted December 14, 2021 On 12/6/2021 at 8:26 PM, josualo said: Hello, I am using it with an Epson without a flatbed, it can be done in several ways, one print on the film that already has glue, another is to print on an acetate and put glue in a channel, then with another pass send the color along with the target. What type of the glue sir? Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 14, 2021 Share Posted December 14, 2021 9 hours ago, Heaven867693 said: What type of the glue sir? They print glue first and then print colour+white+varnish Quote Link to comment Share on other sites More sharing options...
anum11 Posted December 15, 2021 Share Posted December 15, 2021 It is not very durable, i used it on phone cover, just putting phone into my Jean and getting back, after 3 days it started to damage. It is a bit better than sticker maybe. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 15, 2021 Share Posted December 15, 2021 16 minutes ago, anum11 said: It is not very durable, i used it on phone cover, just putting phone into my Jean and getting back, after 3 days it started to damage. It is a bit better than sticker maybe. Did you used ab film or glue in print head? Quote Link to comment Share on other sites More sharing options...
josualo Posted December 16, 2021 Share Posted December 16, 2021 14 hours ago, anum11 said: No es muy duradero, lo usé en la cubierta del teléfono, solo puse el teléfono en mi Jean y regresé, después de 3 días comenzó a dañarse. Quizás sea un poco mejor que la pegatina. Depende del tipo ya que la tinta uv hay de dos tipos para superficies blanda y superficies duras no puedes poner de un tipo a otro ya que no te va a durar, yo tengo impresas hace 3 meses y siguen perfectas Quote Link to comment Share on other sites More sharing options...
josualo Posted December 16, 2021 Share Posted December 16, 2021 On 9/12/2021 at 16:43, Mr.Carter said: ¿De dónde sacaré el pegamento? Ponerlo en el canal. hola, estuve hablando con esta empresa que vende el pegamento,https://www.gzxfy.com/index.html creo recordar que eran sobre los 56$ el bote de litro Quote Link to comment Share on other sites More sharing options...
josualo Posted December 16, 2021 Share Posted December 16, 2021 On 14/12/2021 at 7:18, Heaven867693 said: ¿Qué tipo de pegamento señor? yo estuve haciendo pruebas con pegamento removedor que utilizo para telas, lo aplicaba a un acetato y luego imprimía encima, pero el resultado no era bueno. Quote Link to comment Share on other sites More sharing options...
anum11 Posted December 16, 2021 Share Posted December 16, 2021 15 hours ago, Mr.Carter said: Did you used ab film or glue in print head? Yes used both. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 16, 2021 Share Posted December 16, 2021 18 hours ago, anum11 said: Yes used both. It means Both are not durable? Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted December 16, 2021 Share Posted December 16, 2021 18 hours ago, josualo said: hola, estuve hablando con esta empresa que vende el pegamento,https://www.gzxfy.com/index.html creo recordar que eran sobre los 56$ el bote de litro Ok thankyou will try talking with them , i also want to know that the sample you have printed is it scratch proof Quote Link to comment Share on other sites More sharing options...
anum11 Posted December 17, 2021 Share Posted December 17, 2021 13 hours ago, Mr.Carter said: It means Both are not durable? Used ab film and printed glue too. Quote Link to comment Share on other sites More sharing options...
moss2016 Posted January 20, 2022 Share Posted January 20, 2022 On 12/17/2021 at 12:37 AM, anum11 said: Used ab film and printed glue too. funny how they advertise as scratch proof until you get to see it for yourself,i did a mini conversion for my L805 yesterday while waiting for arduino v3's to arrive. i thought i was doing something wrong but really its not scratch proof,... unless maybe if i use hard inks (currently using hybrid inks). the prints are soft and i can easily scrape them away. using A-B film method Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.