Hangry Muscle Posted October 30, 2021 Share Posted October 30, 2021 I am using Acrorip version 10.4 with the Epson Ecotank Et-8550 and my prints are coming out cut off. Its only printing a portion of the image down the middle of the sheet. I'm also using 13x19 Paper. I included images of the Acrorip settings, printer and the printout sheets. Does anyone know how to fix this? Quote Link to comment Share on other sites More sharing options...
johnson4 Posted October 30, 2021 Share Posted October 30, 2021 3 hours ago, Hangry Muscle said: I am using Acrorip version 10.4 with the Epson Ecotank Et-8550 and my prints are coming out cut off. Its only printing a portion of the image down the middle of the sheet. I'm also using 13x19 Paper. I included images of the Acrorip settings, printer and the printout sheets. Does anyone know how to fix this? Did you try my previous reccomendation of test printing this same file/settings with regular paper and see if it prints correctly? Quote Link to comment Share on other sites More sharing options...
Mdrake2016 Posted October 31, 2021 Share Posted October 31, 2021 I had this problem with Cadlink. The problem was the film. Not sure exactly what the problem was and why specific software has this issue but I taped about 4 inches of film to the beginning of the sheet and it stopped doing this. Eventually, I switched to different film and I no longer have this issue now. Quote Link to comment Share on other sites More sharing options...
Hangry Muscle Posted November 3, 2021 Author Share Posted November 3, 2021 @johnson4 I did and it prints correctly for the most part on regular paper and for nozzle checks. It might be the film, I got it printing though. As the printer begins printing and then pulls the film into the printer. I put a plain piece of white paper in front of the film sheet, then the printer pulls the sheet and paper in further and thats when I pull the white paper back out. This has been the only way to get it to print. Here's a video of me doing the trick. Epson Et8550 Paper Trick Quote Link to comment Share on other sites More sharing options...
johnson4 Posted November 3, 2021 Share Posted November 3, 2021 (edited) Yea, glad you got it to work for you. This is something like I do except all the way across and on the edge, which works fine too. Edited November 3, 2021 by johnson4 Quote Link to comment Share on other sites More sharing options...
SippState Posted April 27, 2022 Share Posted April 27, 2022 Finally got it to print, now it prints too large. No matter what size I set within the software. Any ideas? Quote Link to comment Share on other sites More sharing options...
anum11 Posted April 29, 2022 Share Posted April 29, 2022 On 4/27/2022 at 5:10 AM, SippState said: Finally got it to print, now it prints too large. No matter what size I set within the software. Any ideas? Print out size revision should be 30 cm to 50 cm. if it is changed it will printout wrong sizes Quote Link to comment Share on other sites More sharing options...
Jeanette Posted March 22, 2023 Share Posted March 22, 2023 I have an ET8500 it will print on reg. colored paper, but when I try to print on my film, nothing comes out, what am I doing wrong? Quote Link to comment Share on other sites More sharing options...
johnson4 Posted March 22, 2023 Share Posted March 22, 2023 2 hours ago, Jeanette said: I have an ET8500 it will print on reg. colored paper, but when I try to print on my film, nothing comes out, what am I doing wrong? Probably not detecting the film, need more opaque film. Quote Link to comment Share on other sites More sharing options...
JaxVA Posted September 17, 2023 Share Posted September 17, 2023 Has this issue ever been fully resolved or is everyone just using some trick to make it work? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.