Mr.Carter
-
Posts
186 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Gallery
Store
Downloads
Blogs
Events
Articles
Posts posted by Mr.Carter
-
-
4 hours ago, Heaven867693 said:
Phamthaingoc13579@gmail.com. Thank you sir!
Sent
-
16 hours ago, iwr said:
ilucaphone@gmail.com, thanks for sharing.
Sent
- 1
-
On 6/8/2021 at 9:30 PM, cccsdacaf cdsac said:
thanks very much.ejyb123@gmail.com
Sent
-
On 6/8/2021 at 9:29 PM, cccsdacaf cdsac said:
thanks very much。ejyb123@gmail.com
Sent
-
On 4/25/2021 at 9:07 PM, prithvik said:
what is stepper factor for epson l800
Value will be 16 with 800 microstepping
- 1
-
-
18 hours ago, John Ellison said:
Thank you for your efforts. ellisonjohn89@outlook.com
Sent
-
6 minutes ago, afdermon said:
l800 ahmetdeveci57@gmail.com
Sent
-
49 minutes ago, Pankajjmd said:
Sir i need this L805 please share .. krishnameerut@yahoo.co.in is email +919359949290
Sent.
-
If u dont have v9 u can off "WAVE" function it will also increase ink and put more ink
-
Use acrorip 9.0.3 , this is acrorip 10 and it put very less inks if we compare it with v9.0.3
-
-
Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING
And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING
And thats make it difficult to convert it into flatbed but now it is possible...
pf-encoder will be seperate and arduino will provide all the sensor signal to epson,
Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes
If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed
- 3
-
Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING
And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING
And thats make it difficult to convert it into flatbed but now it is possible...
pf-encoder will be seperate and arduino will provide all the sensor signal to epson,
Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes
If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed
- 3
Epson L800, L805 flatbed printer UV Printer
in UV Flatbed Printers
Posted
No no need to change pipes of capping station